86-577-61712130
Baishi Industrial Zone, Yueqing, Wenzhou, Zhejiang, China
High Quality SMC Type Low Profile Air Gripper Series MHF2
Specification
| Fluid | Air | |||||
| Operating pressure | ø8: 0.15 to 0.7 MPa | |||||
| ø12 to 20: 0.1 to 0.7 MPa | ||||||
| Ambient and fluid temperature | –10 to 60°c (with no condensation) | |||||
| Repeatability | ±0.05 mm Note 1) | |||||
| Maximum operating frequency | Short stroke | 120 c.p.m. | ||||
| Medium stroke | 120 c.p.m. | |||||
| Long stroke | 60 c.p.m. | |||||
| Lubrication | Not required | |||||
| Action | Double acting | |||||
| Auto switch (Option) Note 2) | Solid state auto switch (3-wire, 2-wire) | |||||
Note 1) This is the value when no offset load is applied to the finger.When an offset load is applied to the finger, the maximum value is ±0.15 mm due to the influence of backlash of the rack and pinion.
Model
| Action | Model | Cylinder bore (mm) | Gripping force Note1) | Opening/closing stroke (Both sides) mm | Note 2) Weight (g) | Unobstructed capacity(cm³) | ||||||
| Effective gripping force per finger N | Finger open side | Finger close side | ||||||||||
| Double acting | MHF2-8D | 8 | 19 | 8 | 65 | 0.7 | 0.6 | |||||
| MHF2-8D1 | 16 | 85 | 1.1 | 1 | ||||||||
| MHF2-8D2 | 32 | 120 | 2 | 1.9 | ||||||||
| MHF2-12D | 12 | 48 | 12 | 155 | 1.9 | 1.6 | ||||||
| MHF2-12D1 | 24 | 190 | 3.3 | 3 | ||||||||
| MHF2-12D2 | 48 | 275 | 6.1 | 5.8 | ||||||||
| MHF2-16D | 16 | 90 | 16 | 350 | 4.9 | 4.1 | ||||||
| MHF2-16D1 | 32 | 445 | 8.2 | 7.4 | ||||||||
| MHF2-16D2 | 64 | 650 | 14.9 | 14 | ||||||||
| MHF2-20D | 20 | 141 | 20 | 645 | 8.7 | 7.3 | ||||||
| MHF2-20D1 | 40 | 850 | 15.1 | 13.7 | ||||||||
| MHF2-20D2 | 80 | 1,225 | 28 | 26.6 | ||||||||
Note 1) At the pressure of 0.5 MPa, when gripping point L is 20 mm.
Note 2) Excluding the auto switch weight.
Ordering Information
Dimension(Unit: mm)
Factory & Manufacture Equipments
Manufacture Process
Warehouse
Show Room & Metting Room
Spare Parts
Finished Products
Package
